Pay in 4 interest-free payments of $21.25 Learn more
Ships within 48 hours · Estimated delivery Aug 8 - Aug 13
The Enabler tool is now mounted on the bottom of the motor shaft instead of the top
Differences Between the New and the old Balancer Includes the Enabler Tool
0 comes with additional features that is not on the Dyno 2
Each disk can be mounted on the cutting tools by removing the paper covering the double sided tape beneath
All 3 readings can be done in less than 10 seconds
1/24 Scale Arm Tool The Enabler tool is nowThis ARM Tool is designed to read the resistance of all 1 24 & 1 32nd scale type Armatures one stack at a time. Turn on meter and place the armature to be tested in place, between the two measuring posts. Turn the slot in the commutator facing up. Rotate the metal stack and gently press down to make contact until the meter reading is steady. Record the reading & subtract the tolerance posted on the rear of the meter. All 3 readings can be done in less
US$ 165.00
US$ 110.00
US$ 125.00
US$ 115.00
US$ 130.00
US$ 139.99
US$ 105.00
US$ 44.00
US$ 180.00
US$ 130.00
US$ 155.00
US$ 125.00
US$ 28.00
US$ 140.00
US$ 174.97
US$ 135.00
